Synchronous memory modules

Unlike the previous Pentium 4 and Pentium D design, the Core 2 technology sees a greater benefit from memory running synchronously with the Front Side Bus (FSB). This means that for the Conroe CPUs with FSB of 1066 MT/s, the ideal memory performance for DDR2 is PC2-4200 or PC2-8500 (twice the performance of PC2-4200). In a few configurations, using PC2-5300 instead of PC2-4200 can actually decrease performance. Only when going to PC2-6400 is there a significant performance increase. While DDR2 memory models with tighter timing specifications do improve performance, the difference in real world games and applications is often negligible.

Optimally, the memory bandwidth afforded should match the bandwidth of the FSB closely. The AGTL+ PSB used by all NetBurst processors as well as current and medium-term (pre-QuickPath) Core 2 processors provide a 64-bit data path. Current chipsets provide for a couple of either DDR2 or DDR3 channels.

On jobs requiring large amounts of memory access, the quad-core Core 2 processors can benefit significantly from using a PC2-8500 memory, which runs exactly twice the performance as the FSB; this is not an officially supported configuration, but a number of motherboards offer it.

The Core 2 processor does not require the use of DDR2. While the Intel 975X and P965 chipsets require this memory, some motherboards and chipsets support both the Core 2 and DDR memory. When using DDR memory, performance may be reduced because of the lower available memory bandwidth.