Intel has regained the performance crown from AMD, after its launch of Core 2 Duo line of processors which are based on Intel’s new Core micro architecture. The processors are expected to ship by 27th July 2006. The performance Core 2 Duo is found to be superior than the AMD’s current line of processors.
Intel’s Core 2 Extreme X6800 didn’t lose a single benchmark in our comparison; not a single one. In many cases, the $183 Core 2 Duo E6300 actually outperformed Intel’s previous champ: the Pentium Extreme Edition 965. In one day, Intel has made its entire Pentium D lineup of processors obsolete. Intel’s Core 2 processors offer the sort of next-generation micro-architecture performance leap that we honestly haven’t seen from Intel since the introduction of the P6.
Compared to AMD’s Athlon 64 X2 the situation gets a lot more competitive, but AMD still doesn’t stand a chance. The Core 2 Extreme X6800, Core 2 Duo E6700 and E6600 were pretty consistently in the top 3 or 4 spots in each benchmark, with the E6600 offering better performance than AMD’s FX-62 flagship in the vast majority of benchmarks. Another way of looking at it is that Intel’s Core 2 Duo E6600 is effectively a $316 FX-62, which doesn’t sound bad at all.
We’re still waiting to get our hands on the E6400 as it may end up being the best bang for your buck, but even the slower E6300 is quite competitive with AMD’s X2 4200+ and X2 3800+. If AMD drops the price on those two parts even more than we’re expecting, then it may be able to hold on to the lower end of the performance mainstream market as the E6300 is not nearly as fast as the E6600.
For industry experts, Core 2 Duo beating the Athlon 64 processor family is no surprise: On the one hand, Core 2 Duo is a brand-new state-of-the-art processor, whereas the Athlon 64 X2 has been around for a while. On the other hand, Intel must come out with a superior product to finally beat AMD after two years of Athlon 64 headwinds.
Core 2 is an eighth-generation x86 architecture microprocessor to be produced by Intel based on an all-new CPU design called the Intel Core Microarchitecture, which will replace the NetBurst architecture that has powered Intel processors since 2000. Core 2 also will mark the retirement of Intel’s Pentium brand name that has been used from 1993 and the reunion of Intel’s notebook and desktop product lines since Pentium M was released apart from Pentium 4 in 2003.
Unlike NetBurst-based processors, such as the Pentium 4 and Pentium D, Core 2 will not stress designs based on extremely high clock speeds but rather improvements on other CPU features, including cache size and number of cores. Intel claims that the power consumption of these processors is to be extremely low compared to the Pentiums before.
Intel Core 2 processors will feature EM64T, Virtualization Technology, and Execute Disable Bit. The release will also introduce LaGrande Technology, SSE4, Enhanced SpeedStep Technology, and Active Management Technology (iAMT2).
Intel Core 2 Duo E8400 Dual Core Processor
Core 2 Duo E8400 Dual Core Processor
Intel Core 2 Duo E8400 Dual Core Processor
(3GHz, 6MB, 1333MHz FSB, LGA775 Socket T - MPN: BX80570E8400)
Price Range: $169.99 - $269.66 from 17 Sellers
Description: Based on Intel Core microarchitecture, the Intel Core 2 Duo processor family is designed to provide energy-efficient performance so you can do more at once without slowing down.
Quick Glance
Processor Socket: Intel Socket T (LGA775)
Processor Class: Intel Core 2 Duo
Processor Type: 2
Bus Speed: 1333MHz
Processor Speed: 3000
Processor Speed + Class
Bus Speed: 1333MHz
Processor Speed: 3 GHz
Processor Class: Intel Core 2 Duo
Physical + Memory Specifications
Included Fan Type: ATX
L2 Cache Size: 6 MB
Number of Processor Cores: 2
Processor Socket: Intel Socket T (LGA775)
Warranty
Warranty Information: 3 Year Limited Warranty
Tuesday, February 3, 2009
Intel Core 2
The Core 2 brand refers to a range of Intel's consumer 64-bit single- and dual-core
and 2x2 MCM (Multi-Chip Module) quad-core CPUs with the x86-64 instruction set, based on the Intel Core microarchitecture, derived from the 32-bit dual-core Yonah laptop processor. (Note: The Yonah's silicon chip or die comprised two interconnected cores, each similar to those branded Pentium M). The 2x2 MCM dual-die quad-core[1] CPU had two separate dual-core dies (CPUs)—next to each other—in one quad-core MCM package. The Core 2 relegated the Pentium brand to a mid-end market, and reunified laptop and desktop CPU lines, which previously had been divided into the Pentium 4, D, and M brands.
The Core microarchitecture returned to lower clock rate and improved processors' usage of both available clock cycles and power compared with preceding NetBurst of the Pentium 4/D-branded CPUs. Core microarchitecture provides more efficient decoding stages, execution units, caches, and buses, reducing the power consumption of Core 2-branded CPUs, while increasing their processing capacity. Intel's CPUs have varied very wildly in power consumption according to clock rate, architecture and semiconductor process, shown in the CPU power dissipation tables.
The Core 2 brand was introduced on July 27, 2006, comprising the Solo (single-core), Duo (dual-core), Quad (quad-core), and in 2007, the Extreme (dual- or quad-core CPUs for enthusiasts) version. Intel Core 2 processors with vPro technology (designed for businesses) include the dual-core and quad-core branches.
The brand became immediately successful. The processors were introduced into Apple's popular MacBook series of notebooks, at the time Apple CEO Steve Jobs justified the entire switch to Intel from IBM's PowerPC processors by the Core 2 series' ability to provide high performance at low power consumption, renaming the "PowerBook" series to MacBook to note their lowered power consumption.[6] The series of processors reasserted Intel's role in the processor market after a period in which AMD processors began significantly encroaching on Intel's market share. The processor series became so successful that AnandTech Senior Editor Gary Kay coined the phrase "Conroe" as a verb to describe the releasing of a product that eclipses the competition in a previously hotly contested market
Conroe
The first Intel Core 2 Duo branded processor cores, code-named Conroe (Intel product code 80557), were launched on July 27, 2006, at Fragapalooza, a yearly gaming event in Edmonton, Alberta, Canada. These processors were fabricated on 300 mm wafers using a 65 nm manufacturing process, and intended for desktop computers, as a replacement for the Pentium 4 and Pentium D branded CPUs. Intel has claimed that Conroe provides 40% more performance at 40% less power compared to the Pentium D. All Conroe processors are manufactured with 4 MB L2 cache; however, due to manufacturing defects or possibly for marketing purposes, the E6300 and E6400 versions based on this core have half their cache disabled, leaving them with only 2 MB of usable L2 cache. These Conroe-based E6300 and E6400 CPUs have the B2 stepping.
The lower end E6300 (1.86 GHz) and E6400 (2.13 GHz), both with a 1066 MT/s FSB, were released on July 27, 2006. Traditionally, CPUs of the same family with less cache simply have the unavailable cache disabled, since this allows parts that fail quality control to be sold at a lower rating. When yields improve, they may be replaced with versions that only have the cache amount needed on the die, to bring down manufacturing cost. At launch time, Intel's prices for the Core 2 Duo E6300 and E6400 processors were US$183 and US$224 each in quantities of 1000. Conroe CPUs have improved capabilities over previous models with similar processor clock rates. According to reviews, the larger 4 MB L2 cache vs. the smaller 2 MB L2 cache at the same frequency and FSB can provide a 0–9% performance gain with certain applications and 0–16% performance gain with certain games.[12][13] The higher end Conroe processors are the E6600 (2.4 GHz) and E6700 (2.67 GHz) Core 2 Duo models. The family has a 1066 MT/s front side bus, 4 MB shared L2 cache, and 65 watts TDP. These processors have been tested against AMD's then-current top performing processors (Athlon 64 FX Series), which were, until this latest Intel release, the highest performance X86 CPUs available. Conroe chips also produce less heat than their predecessors — a benefit of the new 65 nm technology and the more efficient microarchitecture. At launch time, Intel's prices for the Core 2 Duo E6600 and E6700 processors were US$316 and US$530, respectively, each in quantities of 1000.
E6320 and E6420 Conroe CPUs at 1.86 and 2.13 GHz respectively were launched on April 22, 2007 featuring a full 4 MB of cache and are considered Conroes.
Intel Core 2 Duo E6600 processor
Intel released four additional Core 2 Duo Processors on July 22, 2007. The release coincided with that of the Intel Bearlake (x3x) chipsets. The new processors are named Core 2 Duo E6540, E6550, E6750, and E6850. Processors with a number ending in "50" have a 1333 MT/s FSB. The processors all have 4 MB of L2 cache. Their clock frequency is similar to that of the already released processors with the same first two digits (E6600, E6700, X6800).[14] An additional model, the E6540, was launched with specifications similar to the E6550 but lacking Intel Trusted Execution Technology and vPro support. These processors are stated to compete with AMD's Phenom processor line and are therefore priced below corresponding processors with a 1066 MT/s FSB.[15]
Intel has stated that the E6300 and the E6400 are Conroe CPUs with the cache disabled. Allendale core CPUs are the E4XX0 series of CPUs.
The lower end E6300 (1.86 GHz) and E6400 (2.13 GHz), both with a 1066 MT/s FSB, were released on July 27, 2006. Traditionally, CPUs of the same family with less cache simply have the unavailable cache disabled, since this allows parts that fail quality control to be sold at a lower rating. When yields improve, they may be replaced with versions that only have the cache amount needed on the die, to bring down manufacturing cost. At launch time, Intel's prices for the Core 2 Duo E6300 and E6400 processors were US$183 and US$224 each in quantities of 1000. Conroe CPUs have improved capabilities over previous models with similar processor clock rates. According to reviews, the larger 4 MB L2 cache vs. the smaller 2 MB L2 cache at the same frequency and FSB can provide a 0–9% performance gain with certain applications and 0–16% performance gain with certain games.[12][13] The higher end Conroe processors are the E6600 (2.4 GHz) and E6700 (2.67 GHz) Core 2 Duo models. The family has a 1066 MT/s front side bus, 4 MB shared L2 cache, and 65 watts TDP. These processors have been tested against AMD's then-current top performing processors (Athlon 64 FX Series), which were, until this latest Intel release, the highest performance X86 CPUs available. Conroe chips also produce less heat than their predecessors — a benefit of the new 65 nm technology and the more efficient microarchitecture. At launch time, Intel's prices for the Core 2 Duo E6600 and E6700 processors were US$316 and US$530, respectively, each in quantities of 1000.
E6320 and E6420 Conroe CPUs at 1.86 and 2.13 GHz respectively were launched on April 22, 2007 featuring a full 4 MB of cache and are considered Conroes.
Intel Core 2 Duo E6600 processor
Intel released four additional Core 2 Duo Processors on July 22, 2007. The release coincided with that of the Intel Bearlake (x3x) chipsets. The new processors are named Core 2 Duo E6540, E6550, E6750, and E6850. Processors with a number ending in "50" have a 1333 MT/s FSB. The processors all have 4 MB of L2 cache. Their clock frequency is similar to that of the already released processors with the same first two digits (E6600, E6700, X6800).[14] An additional model, the E6540, was launched with specifications similar to the E6550 but lacking Intel Trusted Execution Technology and vPro support. These processors are stated to compete with AMD's Phenom processor line and are therefore priced below corresponding processors with a 1066 MT/s FSB.[15]
Intel has stated that the E6300 and the E6400 are Conroe CPUs with the cache disabled. Allendale core CPUs are the E4XX0 series of CPUs.
Conroe L
The Conroe-L Celeron is a single-core processor built on the Intel Core microarchitecture and is clocked much lower than the Cedar Mill Celerons, but still outperforms them. It is based on the 65 nm Conroe-L core,[26] and uses a 400-series model number sequence.[27] The FSB was increased from 533 MT/s to 800 MT/s in this generation, and the TDP was decreased from 65 W to 35 W. Traditionally with Celerons, it does not have Intel VT-x instruction support or SpeedStep. All Conroe-L models are single-core processors for the value segment of the market, much like the AMD K8-based Sempron. The product line was launched on June 5, 2007.
On October 21, 2007, Intel presented a new processor for its Intel Essential Series. The full name of the processor is a Celeron 220 and is soldered on the D201GLY2 motherboard. With 1.2 GHz and a 512 KB second level cache it has a TDP of 19 Watt and can be cooled passively. The Celeron 220 is the successor of the Celeron 215 which is based on a Yonah core and used on the D201GLY motherboard. This processor is exclusively used on the mini-ITX boards targeted to the sub-value market segment.
On October 21, 2007, Intel presented a new processor for its Intel Essential Series. The full name of the processor is a Celeron 220 and is soldered on the D201GLY2 motherboard. With 1.2 GHz and a 512 KB second level cache it has a TDP of 19 Watt and can be cooled passively. The Celeron 220 is the successor of the Celeron 215 which is based on a Yonah core and used on the D201GLY motherboard. This processor is exclusively used on the mini-ITX boards targeted to the sub-value market segment.
Conroe XE
The Core 2 Extreme was officially released on July 29, 2006. However some retailers appeared to have released it on July 13, 2006, though at a higher premium. The less powerful E6x00 models of Core 2 Duo were scheduled for simultaneous release with the X6800, which are both available at this time. It is powered by the Conroe XE core and replaces the dual-core Pentium Extreme Edition processors. Core 2 Extreme has a clock rate of 2.93 GHz and a 1066 MT/s FSB, although it was initially expected to be released with a 3.33 GHz and 1333 MT/s. The TDP for this family is 75–80 watts. With SpeedStep enabled, the average temperature of the CPU when idle is essentially that of the ambient atmosphere with its fan running at 1500 RPM.[16]
At launch time, Intel's price for the Core 2 Extreme X6800 was US$2999 each in quantities of 1000. Like the desktop Core 2 Duo, it has 4 MB of shared L2 cache available. This means that the only major difference between the regular Core 2 Duo and Core 2 Extreme is the clock rate and unlocked multiplier, usual advantages of the "Extreme Edition." The unlocked upward multiplier is of use to enthusiasts as it allows the user to set the clock rate higher than shipping frequency without modifying the FSB unlike mainstream Core 2 Duo models which are downward unlocked only.
At launch time, Intel's price for the Core 2 Extreme X6800 was US$2999 each in quantities of 1000. Like the desktop Core 2 Duo, it has 4 MB of shared L2 cache available. This means that the only major difference between the regular Core 2 Duo and Core 2 Extreme is the clock rate and unlocked multiplier, usual advantages of the "Extreme Edition." The unlocked upward multiplier is of use to enthusiasts as it allows the user to set the clock rate higher than shipping frequency without modifying the FSB unlike mainstream Core 2 Duo models which are downward unlocked only.
Allendale
There was contention regarding whether or not the previously available low-end Core 2 Duo desktop processors (E6300, at 1.86 GHz and E6400, at 2.13 GHz, both with 2 MB L2 cache) were specimens of the Allendale core. Prior to Q1 2007, all E6300 and E6400 processors released were Conroe (4 MB L2 cache) cores with half their L2 cache disabled. The Allendale core, manufactured with 2 MB L2 cache in total, offers a smaller die size and therefore greater yields.
Quoted from The Tech Report:
You'll find plenty of sources that will tell you the code name for these 2 MB Core 2 Duo processors is "Allendale," but Intel says otherwise. These CPUs are still code-named "Conroe," which makes sense since they're the same physical chips with half of their L2 cache disabled. Intel may well be cooking up a chip code-named Allendale with 2 MB of L2 cache natively, but this is not that chip.[18]
Another difference between the premium E6000 series (Conroe core) and the E4000 series (Allendale core) is the front side bus clock rating. The E4000 series are rated to run on a quad-pumped 200 MHz front side bus ("800 MT/s") while the E6000 series are rated to run on a quad-pumped 266 MHz front side bus ("1066 MT/s"). The E4000 series also lack support for Intel VT-x instructions.
The Core 2 Duo E4300[19] uses an Allendale core, released on January 21, 2007. The Allendale processors use a smaller mask with only 2 MB of cache, thereby increasing the number of chips per wafer. Allendale processors are produced in the LGA775 form factor, on the 65 nm process node. E6300 and E6400 CPUs have been made from both the 4 MB Conroe die and the 2 MB L2 Allendale die. The steppings of the chip differs depending on the die used- the Conroe-based E6300 and E6400 are stepping B2 and the Allendale-based E6300 and E6400 are stepping L2.
Initial list price per processor in quantities of one thousand for the E4300 was US$163. A standard OEM price was US$175, or US$189 for a retail package. The price was cut on April 22, 2007,[20] when the E4400 was released at $133 and the E4300 dropped to $113. Allendale processors with half their L2 cache disabled were released in mid-June 2007 under the Pentium Dual-Core brand name. The working cache memory was reduced by half again when the Allendale core was released under Intel's Celeron brand; the Celeron E1200 has a 512k L2 cache shared between its two cores.
On July 22, 2007, an E4500 Allendale was launched, phasing out the E4300 model.This was accompanied by a price cut for the E4400 model.
Quoted from The Tech Report:
You'll find plenty of sources that will tell you the code name for these 2 MB Core 2 Duo processors is "Allendale," but Intel says otherwise. These CPUs are still code-named "Conroe," which makes sense since they're the same physical chips with half of their L2 cache disabled. Intel may well be cooking up a chip code-named Allendale with 2 MB of L2 cache natively, but this is not that chip.[18]
Another difference between the premium E6000 series (Conroe core) and the E4000 series (Allendale core) is the front side bus clock rating. The E4000 series are rated to run on a quad-pumped 200 MHz front side bus ("800 MT/s") while the E6000 series are rated to run on a quad-pumped 266 MHz front side bus ("1066 MT/s"). The E4000 series also lack support for Intel VT-x instructions.
The Core 2 Duo E4300[19] uses an Allendale core, released on January 21, 2007. The Allendale processors use a smaller mask with only 2 MB of cache, thereby increasing the number of chips per wafer. Allendale processors are produced in the LGA775 form factor, on the 65 nm process node. E6300 and E6400 CPUs have been made from both the 4 MB Conroe die and the 2 MB L2 Allendale die. The steppings of the chip differs depending on the die used- the Conroe-based E6300 and E6400 are stepping B2 and the Allendale-based E6300 and E6400 are stepping L2.
Initial list price per processor in quantities of one thousand for the E4300 was US$163. A standard OEM price was US$175, or US$189 for a retail package. The price was cut on April 22, 2007,[20] when the E4400 was released at $133 and the E4300 dropped to $113. Allendale processors with half their L2 cache disabled were released in mid-June 2007 under the Pentium Dual-Core brand name. The working cache memory was reduced by half again when the Allendale core was released under Intel's Celeron brand; the Celeron E1200 has a 512k L2 cache shared between its two cores.
On July 22, 2007, an E4500 Allendale was launched, phasing out the E4300 model.This was accompanied by a price cut for the E4400 model.
Merom
Merom, the first mobile version of the Core 2, was officially released on July 27, 2006 but quietly began shipping to PC manufacturers in mid-July alongside Conroe.[21][22] Merom became Intel's premier line of mobile processors, with mostly the same features of Conroe, but with more emphasis on low power consumption to enhance notebook battery life. Merom-based Core 2 Duo provides a slight performance increase associated with 3D rendering and media encoding tasks [3], yet maintains the same battery life as the Yonah-based Core Duo. Merom is the first Intel mobile processor to feature Intel 64 architecture.
The first version of Merom is "drop-in" compatible with Napa platform for Core Duo, requiring at most a motherboard BIOS update. It has a similar thermal envelope of 34 W and the same 667 MT/s FSB rate.[23] The Merom die features 4 MB L2 cache, half of which is deactivated in the T5xx0 CPUs. A native 2 MB L2 version of the Merom core, called Merom-2M, was rolled out in early 2007. The Merom-2M core uses the steppings L2 and M0 and the ultra-low-voltage versions of the Core 2 Duo use this core.
A second wave of Merom processors featuring an 800 MT/s FSB and using the new Socket P was launched on May 9, 2007.[24] These chips are part of Santa Rosa platform.[25] Low voltage versions were also released on May 9, 2007.
The first Core 2 Solo processors were launched in Q3 2007 and consisted of the U2100 and U2200, which run at 1.06 and 1.2 GHz, respectively. They both feature a 533 MT/s FSB and are part of Intel's ULW family, running at only 5 W. Like the rest of the Core 2 family, they are 64-bit compatible. They were released with compatibility with the Napa platform rather than the newer Santa Rosa platform due to power consumption concerns. [26]
Merom (מרום) is the Hebrew word for a higher plane of existence or a level of heaven, BaMerom (במרום) means "in the heavens". The name was chosen by the Intel team in Haifa, Israel, who designed this processor.
See the Merom section of "List of Intel Core 2 microprocessors" for a list of Intel processors.
The first version of Merom is "drop-in" compatible with Napa platform for Core Duo, requiring at most a motherboard BIOS update. It has a similar thermal envelope of 34 W and the same 667 MT/s FSB rate.[23] The Merom die features 4 MB L2 cache, half of which is deactivated in the T5xx0 CPUs. A native 2 MB L2 version of the Merom core, called Merom-2M, was rolled out in early 2007. The Merom-2M core uses the steppings L2 and M0 and the ultra-low-voltage versions of the Core 2 Duo use this core.
A second wave of Merom processors featuring an 800 MT/s FSB and using the new Socket P was launched on May 9, 2007.[24] These chips are part of Santa Rosa platform.[25] Low voltage versions were also released on May 9, 2007.
The first Core 2 Solo processors were launched in Q3 2007 and consisted of the U2100 and U2200, which run at 1.06 and 1.2 GHz, respectively. They both feature a 533 MT/s FSB and are part of Intel's ULW family, running at only 5 W. Like the rest of the Core 2 family, they are 64-bit compatible. They were released with compatibility with the Napa platform rather than the newer Santa Rosa platform due to power consumption concerns. [26]
Merom (מרום) is the Hebrew word for a higher plane of existence or a level of heaven, BaMerom (במרום) means "in the heavens". The name was chosen by the Intel team in Haifa, Israel, who designed this processor.
See the Merom section of "List of Intel Core 2 microprocessors" for a list of Intel processors.
Subscribe to:
Posts (Atom)